Chastity.SupportResource guides, field notes, and peer support

Modding a cage with beeswax

Reshape the inside of a cage with wax you can rework any time.

Beeswax is the easy way to change the inside of a cage. It’s soft, it stays where you press it, and if you don’t like the result you can pull it out and try again. For a permanent change, see the resin-dipped cage.

Wax works on any cage, including plastic ones, which resin doesn’t suit. Modelling clay would probably work too.

The downside: packed wax can get gross over time. Bacteria love it, even with daily cleaning. Check it when you clean the cage, and replace it when it starts to look or smell off. That’s the main reason to move to resin on a metal cage once you know what shape works.

Use the right wax

You need wax soft enough to warm up and work in your hands. Bars of beeswax work. The pellets that crumble when you squeeze them don’t.

Warm a piece in your hands, work it into a ball, and press it into place.

Add a flat side for alignment

A round cage lets everything turn inside it, and things drift out of line. Press a pad of wax into the bottom of the cage, on the frenulum side, and flatten it. The inside is no longer round, so it works like a keyhole. Your dick settles into that shape and always rests with the flat side in the same place, which keeps everything lined up with the pee hole.

Fill the crevices

Gaps and hollows inside a cage cause blood blisters. When you get hard, your skin presses into them and pushes the air out. When you go soft again, the skin pulls back but no air gets in, so the space ends up under suction. The suction, plus the damp that collects there, raises blisters.

Pack those spots with wax. With no space left for suction or damp to build up, there’s nothing to raise a blister.

Round off the bottom edge

This one is for short cages that sit over the glans and push inward, so the skin folds back around the outside of the cage. That skin has to roll over the rim of the cage’s opening, and a hard rim makes it catch.

Run a bead of wax along the rim on the bottom side, the frenulum side, where the flat pad goes. It turns the edge into a smooth lip, so the skin near your frenulum moves around it more easily. It also makes the bend the skin has to go around wider and gentler, so the rim stops being a pinch point.

The conversation lives on Telegram.

Ask questions, share what works, or just read along. Comments on this site have been permanently disabled, for science.

Join on Telegram