Softening a plastic cage
Some plastic cages soften in boiling water, so you can reshape them a little: to widen the ball gap, for example.
You can ruin the cage this way, so only try it on one you’re willing to lose. It’s also a real burn risk:
- Wear gloves that can get wet and still protect you from heat.
- Hold the new shape until the cage has cooled all the way. Run it under cool water for a while before you let go, or it will spring back.
3D-printed cages
Printed cages have lots of tiny ridges and crevices where grime builds up. How you smooth them depends on the material:
- ABS can be smoothed cheaply with acetone vapour. Acetone is very flammable, so do it somewhere well ventilated and away from flames.
- Nylon (PA12, often printed with MJF) doesn’t really smooth that way.
Not sure what you’ve got? Search for “[your material] 3D print smoothing” plus “reddit” before you try anything.
Don’t coat a printed cage with a spray-on sealant. It’s not clear how body-safe they are on skin that thin and absorbent.